Deep well pump Grundfos SP215-1, 18.5kW, 50Hz
- Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally.
- All steel components are made of stainless steel, EN 1.4301 (AISI 304), which ensures good corrosion resistance.
- This pump is approved for drinking water.
- Pump is equipped with an 18.5 kW MS6000 motor with sand protection, mechanical shaft seal, water lubricated shaft bearings and a volume compensating diaphragm.
- The motor is a closed-type submersible motor with good mechanical stability and high efficiency.
- Suitable for temperatures up to 40°C.
- The motor is equipped with a Grundfos Tempcon temperature sensor which, through communication via the power cable together with a control panel MP204, enables monitoring of the temperature.
- The motor is intended for direct start (DOL).
Additional product
information The pump is suitable for applications similar to the following:
- Raw water supply
- Irrigation
- Groundwater lowering
- Pressure increase
- Fountain applications
*-The image of the product may differ from the actual product.
| Liquid |
| Pump Liquid |
Water |
| Max. liquid temperature |
40°C |
| Max liquid t at 0.15 m/s |
40°C |
| Liquid temp |
20°C |
| Density |
998.2 kg/m³ |
| Technical data |
| Speed |
2900 rpm
|
| Resulting flow |
215 m³ /h |
| Resulting lift height for the pump |
23 m |
| Reduce. impeller |
No |
| Shaft seal for engine |
CER/CARNBR |
| Read on the nameplate |
CE, GOST2 |
| Curve tolerance |
ISO9906:2012 3B |
| Pump type |
SP 215 |
| Step |
1 |
| Model |
C |
| Valve |
Yes |
| Engine version |
T40 |
| Material |
| Pump |
Stainless steel EN 1.4301
AISI 304 |
| Impeller |
Stainless steel EN 1.4301
AISI 304 |
| Engine |
Stainless steel
DIN W.-No. 1.4301
AISI 304 |
| Installation |
| Print page |
RP6 |
| Engine diameter |
6" |
| Electrical data |
| Engine type |
MS6000 |
| Application. engine |
Grundfos |
| Power consumption - P2 |
18.5 kW |
| Power requirement (P2) for pump |
18.5 kW |
| Mains frequency |
50 Hz |
| Rated voltage |
3 x
380-400-415 V
|
| Nominal current |
42.0-41.0-
41.5 A
|
| Starting current |
510-560-580% |
| Cos phi - efficiency |
0.85-0.82-0.79 |
| Speed |
2860-2880-
2890 rpm |
| Startup method |
direct-on-lining |
| Protection class (EC 34-5) |
IP68 |
| Insulation class (EC 85) |
F |
| Engine protection |
NO |
| Thermal protection |
external |
| Built-in temp. transmitter |
Yes |
| Engine no |
78195517 |
| Others |
| Minimum efficiency index ,MEI ≥ |
- |
| Net weight |
100 kg |
| Gross weight |
126 kg |
| Delivery volume |
0.2 m³ |
Performance curves
» Drawing with measurement description
